We collaborate with you to provide a variety of solutions for different factors such as:
- Low maintenance cost
- Low CO diffusion
- Long lifecycle
- Ability to run the cascading system
What is the difference between condensing boilers and traditional boilers? Which one is more efficient?
In a conventional boiler with the combustion of fuel and flame formation, most of the thermal energy is generated from hot gas which passes through the heat exchanger and is transferred to the water, making the water temperature increase. Water steam is one of the products of combustion and is the result of the reaction of hydrogen and oxygen which is driven out through the chimney. But in the condensing boilers, this water steam ,due to the loss of hidden evaporation ,heat is converted to based on the design of the condensing boilers (condensate) to liquid, and the heat of the pot is transmitted to the water. Depending on the design of the condensing boilers converter, except for the efficiency of the boiler, the efficiency is increased by 10 to 12 percent. If you want the boiler to be in condensate state, at the highest efficiency, you need to control the return water temperature to the boiler. otherwise, the boiler will work as a high-efficiency boiler. Condensed water in condensed boilers, because of its acidic nature (ph 3-5), should be discharged into sewage with special conditions, and in Arisman boilers this fluid enters the tank after the siphon and the ph of this liquid, after the storage in a limestone or marble tank, reaches about 7 and drains into the sewage. Since the gases from combustion in Arisman Condensing Boiler are about 55°C and there is also the possibility of condensation in the smoke chamber, the chimney should be made UPVC or polypropylene from the beginning in order not to be obsolete. Arisman Condensing Boilers have a thermal efficiency of 93%.
For the process of transferring this energy, the type of consumer design and execution system is very important. Controlling the amount of energy used by the burner with the amount of water temperature set in the boiler is another feature of condensing boilers which is called "torch modulation system" and this modulation is 1:5 in Arisman boiler. The burners used in the Arisman Condenser Boilers are made up of cylindrical or lattice fiber metall whose complete stages of its construction are carried out at the company. The boiler control board is fully designed and manufactured in the company so there are no such issues as the high price of the board and the impossibility of repair and maintenance.
Ability to capacity change and control
Condensing boilers at can be put in the thermal circuit so that you can manage energy consumption.
Time scheduling capability
If the boilers are installed in a cascade pattern the control panel system can put several boilers in the circnit according to the temperature of the outside and inside environment.